Choosing the right equipment to polish your own car can be a challenging experience. However, when you know what to look for and what you need to buy, your job is made much easier. Especially, when you want to learn how to use polisher equipment and its accessories to do the best job possible. Having said this, here is a step by step guideline that will walk you through the process of how to use your polisher.
1.Wash the surface of your vehicle with soap or shampoo
To get rid of all traces of dirt, sand, and debris, you should use a chemical-free based soap or shampoo. For the best results, you need to make sure that you remove every speck of sand to avoid the possibility of leaving scratches on the car during the buffing process.
After you clean the vehicle with soap or shampoo, you should make sure that you take your car through a steam cleaning process. This is because washing alone will not remove all of the pebbles, sand or sharp wood chips that can be found on the surface of the vehicle. By using the steam cleaning process, you will be able to leave the car clean and smooth since it will dislodge dirt and dust from between the smallest cracks in the vehicle.
3.Dry Off the Vehicle
Use a microfiber cloth to dry the surface of your car. When drying, you need to make sure no wet spots are left behind since it leaves uneven application and streaking during the polishing application process.
4.To remove minute contaminants clay bar its Surface
Clay bar your car to removes any haze and slight imperfections and haze from its surface. After the car has been clay barred, wipe the surface with a microfiber towel.
5.Apply polish to your applicator pad
Once you have prepped your vehicle, you can start the process by adding 5 drops of your polisher around the rounded edges of the applicator pad and then use a liquid conditioner to soften up and lubricate its surface. To get an even look, the applicator pad should be lightly placed on the hood of the vehicle before turning on the electric polisher.
To get an even shine all over the vehicle, it is important that you learn how to overlap its movement as you pass over each specific area (2 x 2-foot area). This will allow the polish to break down and help you to achieve the best results.
6.Equipment Design Varies -- Need to Use Based on Individual Instructions
It is also important to remember that the polisher equipment and its accessories will vary based on features. For instance, some of the top polishers will have several different speeds that can be set by the user. To get started, some people prefer going very slow and then speeding up as they get the hang of it.
If you are looking to buy a professional polisher, here are 2 products that we highly recommend as a great choice for you.
Makita 9237CX3 Makita 7" Polisher , 10 AMP, 600-3,000 RPM
Variable speed dial and trigger - 0 - 3200 RPM
Designed with a Soft start
For Operator comfort designed with a Rubberized loop handle
Wire mesh intake helps to eliminate wool fibers from getting to the Amps 10 motor
WEN 10PMR 10-Inch Waxer/Polisher
120-volt 0.75-amp that has a permanent magnet motor
Wen designed to perform 3200 orbits per minute
For ease in bonnet change, this polisher is equipped with a flat top design
Designed with multiple purposes in mind including cars, banisters, kitchen and bathroom countertops
Comes with a 10 in terry cloth bonnet and a 10-Inch applicator
Buying the right type of polisher for your vehicles will help you to do a professional job. By following all of the instructions listed above and investing in a polisher that is highly recommended, you can do a job that will get rid of scratches and any other imperfections in your paint job